Server QOS 8-Bay Guia do Utilizador descarregar pdf (Página 128)

Virtual Connect networks 128

Aggregation groups require multiple ports from a single VC-Enet module to be connected to a single

external switch that supports automatic formation of LACP aggregation groups, or multiple external

switches that utilize distributed link aggregation. HP has guidelines available for users who wish to

connect to external switches that support distributed link aggregation capabilities.

Multiple aggregation groups may be formed from the ports selected for the network. The highest

performing aggregation group is selected as active, with other aggregation groups and individual

links used as standby connections.

o Failover—If this mode is selected, set the port to Primary or Secondary. Only a single link is used as

the active link to the external networks, with other ports used as standby connections.

5. If the Connection Mode is Auto, select the LACP Timer:

o Domain Default—If this mode is selected, the network uses the domain-wide LACP timer

configuration setting. The current setting is displayed as part of the radio button label. See the

descriptions for Short and Long.

o Short—If this mode is selected, VC requests short (every 1 second) LACP control messages on a LAG

that is formed with the uplink ports.

o Long—If this mode is selected, VC requests long (every 30 seconds) LACP control messages on a

LAG that is formed with the uplink ports.

6. Create the associated FCoE networks that will use this shared uplink. For more information, see

"Defining an FCoE network (on page 129)."

7. Create the Associated Networks that will use this shared uplink:

a. Click Add above the table.

-or-

Right-click the header row in the Associated Networks table to display a menu, and then select Add.

b. To add a single associated network:

i. Select the a single Associated Network radio button.

ii. Enter the name of the network.

iii. Enter the number for the VLAN ID (1 to 4094) for that network as defined by the network

administrator and as configured on the external Ethernet switch.

iv. Select whether to enable (checked) or disable (unchecked) native VLAN. Only one network per

shared uplink set can be selected as the native VLAN. See "Shared uplink sets and VLAN

tagging (on page 85)."

v. Skip to step d.

c. To add multiple associated networks:

i. Select the multiple Associated Networks radio button. Creating multiple associated networks in

bulk allows for a shorter setup time. All networks created in bulk share the same settings. These

networks can be edited individually after they are created.

ii. Enter the name of the networks. The networks that are created together share a common naming

convention of a prefix, the VLAN ID, and a suffix. The prefix and suffix are both optional.

iii. Enter comma separated VLAN IDs, VLAN ID ranges, or a mixture of both. For example, enter

3,9,15-20 to create eight associated networks with the VLAN IDs 3, 9, 15, 16, 17, 18, 19,

and 20.

d. To add a color to the network, select a color from the Color pull-down menu. The network color is

used as visual identifier for the network within VCM.

1 2 ... 123 124 125 126 127 128 129 130 131 132 133 ... 307 308

Server QOS 8-Bay Guia do Utilizador Página 128

Comentários a estes Manuais

Server QOS 8-Bay Guia do Utilizador Página 128

Comentários a estes Manuais

Manuais e produtos relacionados com Quadros elétricos Server QOS 8-Bay